Hi guys, here is a full project with audio stems and presets for Kuassa’s Amp Creme . It includes all the guitars, midi file for the drums, bass guitar which is low tuned guitar, sampled snare track and reference drum track with Steven Slate 3.5 Drum Samples.
You can download the project at the end of this page!
Oh, The name of the tune is “Good Day” hope you enjoy it!
Can’t wait to hear your MIX! 🙂
Here is my mix for comparison:
DAW used: Reaper 4
Drums: Kontakt 5 with Steven Slate 3.5 drums
Drums EQ: ReaEQ on the full drum kit
Used some High Pass 34-5Hz, too much sub in the kick
Lowered lows around 124hz to remove some overpowering
in the mix from the lows buildup
Drums Compression: Kjaerhus Audio Compressor
http://www.vst4free.com/index.php?dev=Kjaerhus_Audio
It’s an old plugin and its 32 bit, but somehow still love it
and it worked well on the whole kit
Compressor Stock preset: Drums
http://www.kuassa.com/products/cerberus-bass-amplifikation/
http://www.vst4free.com/free_vst.php?plugin=Ferox&id=2063
Intro Guitar Track:
Intro guitar:
Kjaerhus Audio Compressor – preset: Vocal
worked great to keep the dynamic even
http://www.vst4free.com/index.php?dev=Kjaerhus_Audio
EQ – ReaEQ
Low Shelf: 85.7
Boosted 3670.8 hz by 5.6dB, in some cases it would be too much,
but in this mix I needed some more presence of the guitar /Ibanez RG with hum buckers – pretty dark guitar, compared to Strats /
Maybe if the guitar was a Strat type, it wouldn’t be necessary .
High Guitar Delay track:
Kjaerhus Audio Compressor – preset: Vocal
The same settings as on the Intro Guitar Track!
http://www.vst4free.com/index.php?dev=Kjaerhus_Audio
Kjaerhus Audio Classic Delay emulates 3 of the most commonly used delays / echo sounds types: Tape, Analog, and Digital.
One of my favorites for guitars!
Power Rhythm guitars Left and Right channels
Kuassa Creme and ReaEQ settings:
Left Guitar:
Left Guitar EQ:
Low Shelf 91hz
Band: 312hz -3.8dB : Had to clear some 300hz “boxy” frequencies”
Band: 3069hz – 6.6dB: the presence was too much for this mix
Low Pass: 6074hz – 3.0dB: space for the other instruments and more detailed tone.
Right Guitar:
Right Guitar EQ:
Low Shelf 91hz
Band: 300hz +2dB : Had to add some “body
Band: 2879hz – 4.4dB: the presence was too much again
Low Pass: 5548hz – 3.0dB: Again more space added for the other instruments and more detailed tone
Solo Guitar :
Solo Guitar EQ:
Low Shelf: 91.4hz
Band: 300hz +2dB : Had to add some “body
Band: 606hz +5dB boost: This worked well for the solo to pop-out in the mix.
Band: 2872 hz -3.0dB – again some shaping
Low Pass: 4222hz – 3.0dB Bandwidth: 0.80
Again more space added for the other instruments and more detailed tone
http://www.geocities.jp/webmaster_of_sss/vst/#catdelay
Cat Delay is an “old” or “vintage” stereo delay plugin from Slim Slow Slider. It’s only 68kb in size 🙂 But I love it!
The Cat Delay features independent control of the tempo of the left and right channels to the BPM of the VST host, independent control of the note-length settings of each channel, and a filter section. The delay plugin is very intuitive to use, and it can make great sounding delay lines in no time!
Project Reverb Send
OmniVerb
http://www.vst4free.com/free_vst.php?id=545
All the guitars were sent to a Aux – send Bus Track with OmniVerb.
Also the replaced snare track is using the same reverb
You can use any of your favorite reverb
Master Track
IK The White 2A Leveling Amplifier
My favorite Mix bus compression
Bus Master Track EQ:
High Pass: 47 hz
Band: 384hz -2.4dB Q: 0.80 – Opens the whole sound
Band: 2871hz -4,4 dB Cut: Removed some build up from the guitars presence
High Shelf: 3906db -+2.0dB boost- Clarity
Kratos 2 Maximizer
Limiting the master bus transparently!
Download the archive with all the tracks used in the project and all the presets for Kuassa Creme Amp and Cerberus Bass Amp HERE
